User login

Forgot your password?

Product details

Markets Our approach Coating solutions Coaters Knowledge Base Company

DELTA-HEAT® 300

Article number: 08405816


DELTA-HEAT® 300 is a topcoat for a zinc flake basecoat or a metallic substrate. In the first case it primarily enhances the temperature resistance of the basecoat; in the second case it reduces the formation of scale during annealing processes.The DELTA-HEAT® 300 is applied via a non-electrolytic application technique directly onto the basecoat or the substrate (part). The zinc flake technique is described in the standards DIN EN ISO 10683 and DIN EN ISO 13858. The application technology can vary according to the dimension and weight of the part; e.g. small parts are usually coated as dip-spin, bigger parts are usually spray coated. All Dörken MKS products have always been free of harmful heavy metals such as chromium VI. As there is no hydrogen involved during the application process, there is no danger of application-related hydrogen-induced stress corrosion cracking.

Category

  • VH-Topcoat
    VH-Topcoat
  • high-temperature
    high-temperature

Requirements

Corrosion resistance

  • enhances the corrosion protection of the basecoat

Temperature resistance

  • Maintains corrosion protection of a basecoat after high heat exposure (up to 600°C) for a short duration.
  • Maintains corrosion protection of a basecoat after medium heat exposure (up to 400°C) for a long duration.

Adhesion

  • fulfils the requirements of the multi-impact testing (determination of stone-chip resistance) acc. to DIN EN ISO 20567-1.

Special features

  • inorganic
  • water-based
  • gaugeability
  • over-paintable

Surface / Substrate

  • zinc flake basecoat
  • steel
  • high-strength steel
  • stainless steel
  • zinc die cast
  • passivated zinc/zinc alloys
  • typical dry film thickness of 6-12 µm
  • The technical feasibility depends on pretreatment and individual characteristics of each material.

Application technology

  • dip-spin
    dip-spin
  • spray
    spray
  • brushing
    brushing

Legal conditions

  • meets the EU End-of-Life Vehicle Directive 2000/53/EC
  • meets the RoHS 2 guidelines (also known as EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC)
  • meets the REACh requirements

Contact Person

  • Emre Kocak

Selection of suitable parts

Washers

Big parts

Metrical threaded bolts >M16

Metrical threaded bolts M2-M16

Non metrical threaded parts

Nuts

Pipes and tubes

Advised parts

Suitable parts

Specifications

  • MAN - 183-3
PDF