Login

Forgot your password?

Product details

Markets Our approach Coating solutions Coaters Knowledge Base Company
US

DELTA-eLACK® 800

Article number: 084GE001


DELTA-eLACK® 800 is a KTL-topcoat for a zinc flake basecoat, phophate or other metallic substrates. The DELTA-eLACK® 800 is, within the coating system, responsible for multifunctional characteristics such as a defined coefficient of friction window, resistance to media, colouring etc. The DELTA-eLACK® 800 is applied via an electrolytic application technique directly onto the basecoat or onto an untreated substrate (part). The application technique is described in the standard DIN 55655. The application technology can vary according to the dimension and weight of the part; e.g. smallest parts are usually coated in the EC-Automat 2000+, bigger parts are coated in the newly developed drum.All Dörken MKS products have always been free of harmful heavy metals such as chromium VI.

Category

  • KTL

Requirements

Corrosion resistance

  • delays galvanic corrosion
  • enhances the corrosion protection of the basecoat

Defined coefficient of friction window

  • µtot = 0,09-0,14 (VDA 235-101 & DBL 9440)

Media resistance

  • fulfils chemical resistance against laboratory chemicals according to DIN EN ISO 2812
  • fulfils chemical resistance against operating fluids according to DIN EN ISO 2812

Resistance against

  • Corrosion resistance
  • Media resistance
  • Defined coefficient of friction window

Surface / Substrate

  • zinc flake basecoat
  • steel
  • zinc die cast
  • passivated zinc/zinc alloys
  • tpyical dry film thickness of 6-25 µm
  • Even layer construction possible.
  • The technical feasibility depends on pretreatment and individual characteristics of each material.

Application technology

  • Cathodic electrodeposition (bulk parts)

Special features

  • organic
  • water-based
  • integrated lubricant
  • gaugeability
  • over-paintable

Legal conditions

  • meets the EU End-of-Life Vehicle Directive 2000/53/EC
  • meets the RoHS 2 guidelines (also known as EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC)
  • meets the REACh requirements

Contact Person

  • Emre Kocak

Selection of suitable parts

Washers

Hose clamps

Panels

Metrical threaded bolts >M16

Metrical threaded bolts M2-M16

Non metrical threaded parts

Clips

Stamped parts

Nuts

Pipes and tubes

Brake parts

Rivets

Springs

Advised parts

Suitable parts

Specifications

  • ArvinMeritor - AM P104
  • General Motors - GMW14671
  • Volkswagen - TL 196
PDF