User login

Forgot your password?

Product details

Markets Our approach Coating Solutions Coaters Knowledge Base Company

DELTA-PROTEKT® VL 451 GZ

Article number: 08405542


DELTA-PROTEKT® VL 451 GZ is a topcoat for a zinc flake basecoat or for other metallic substrates. In a system e.g. made of basecoat + topcoat, it is responsible for multifunctional characteristics such as a defined coefficient of friction window, resistance to media, colouring etc. Additionally, it can enhance the corrosion protection properties of the basecoat.The DELTA-PROTEKT® VL 451 GZ is applied via a non-electrolytic application technique directly onto the substrate (part). The zinc flake technique is described in the standards DIN EN ISO 10683 and DIN EN ISO 13858. The application technology can vary according to the dimension and weight of the part; e.g. small parts are usually coated as dip-spin, bigger parts are usually spray coated. All Dörken MKS products have always been free of harmful heavy metals such as chromium VI. As there is no hydrogen involved during the application process, there is no danger of application-related hydrogen-induced stress corrosion cracking.

Category

  • VL-Topcoat
    VL-Topcoat

Requirements

Corrosion resistance

  • delays galvanic corrosion
  • enhances the corrosion protection of the basecoat

Defined coefficient of friction window

  • µtot = 0,09-0,14 (VDA 235-101 & DBL 9440)
  • prevents stick-slip effects as according to VDA 235-203

Media resistance

  • fulfils chemical resistance against operating fluids according to DIN EN ISO 2812

Weathering resistance

  • fulfils requirements of artificial weathering and exposure to artificial radiation acc to DIN EN ISO 16474
  • fulfils requirements of artificial weathering (fluorescent UV lamps and water) acc to DIN EN ISO 11507
  • fulfils the requirements of natural outdoor exposure according to DIN EN ISO 12944-2

Special features

  • organic
  • solvent-based
  • integrated lubricant
  • gaugeability

Surface / Substrate

  • zinc flake basecoat
  • stainless steel
  • zinc die cast
  • aluminum die cast
  • passivated zinc/zinc alloys
  • Phosphat
  • typical dry film thickness of 4-20 µm
  • Even layer construction possible.
  • The technical feasibility depends on pretreatment and individual characteristics of each material.

Application technology

  • dip-spin
    dip-spin
  • spray
    spray
  • dip-drain
    dip-drain

Legal conditions

  • meets the EU End-of-Life Vehicle Directive 2000/53/EC
  • meets the RoHS 2 guidelines (also known as EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC)
  • meets the REACh requirements

Contact Person

  • Thorsten Speck

Selection of suitable parts

Panels

Metrical threaded bolts M2-M16

Stamped parts

Nuts

Washers

Big parts

Metrical threaded bolts >M16

Non metrical threaded parts

Brake parts

Advised parts

Suitable parts

Specifications

  • ASTM - F3393
  • ASTM - F3125
  • ISO - ISO/EN 10683
PDF