Login

Forgot your password?

Product details

Markets Our approach Coating solutions Coaters Knowledge Base Company
US

DELTA®-SEAL GZ SCHWARZ

Article number: 08400020


DELTA®-SEAL GZ SCHWARZ is a topcoat for a zinc flake basecoat or for other metallic substrates. In a system e.g. made of basecoat + topcoat, it is responsible for multifunctional characteristics such as a defined coefficient of friction window, resistance to media, colouring etc. Additionally, it can enhance the corrosion protection properties of the basecoat.The DELTA®-SEAL GZ SCHWARZ is applied via a non-electrolytic application technique directly onto the substrate (part). The zinc flake technique is described in the standards DIN EN ISO 10683 and DIN EN ISO 13858. The application technology can vary according to the dimension and weight of the part; e.g. small parts are usually coated as dip-spin, bigger parts are usually spray coated. All Dörken MKS products have always been free of harmful heavy metals such as chromium VI. As there is no hydrogen involved during the application process, there is no danger of application-related hydrogen-induced stress corrosion cracking.

Category

  • DS-Topcoat

Requirements

Corrosion resistance

  • delays galvanic corrosion
  • enhances the corrosion protection of the basecoat

Defined coefficient of friction window

  • µtot = 0,09-0,14 (VDA 235-101 & DBL 9440)
  • µtot = 0,12-0,18 (Ford S307)
  • prevents stick-slip effects as according to VDA 235-203

Media resistance

  • fulfils chemical resistance against laboratory chemicals according to DIN EN ISO 2812
  • fulfils chemical resistance against operating fluids according to DIN EN ISO 2812
  • fulfils fertilizer resistance as per customer specification AMAZONE

Adhesion

  • fulfils the requirements of the bend test (conical mendril) acc to DIN EN ISO 6860.
  • fulfils the requirements of cupping test acc to DIN EN ISO 1520.

Resistance against

  • Corrosion resistance
  • Media resistance
  • Weathering resistance
  • Resistance against mechanical influence
  • Defined coefficient of friction window

Surface / Substrate

  • zinc flake basecoat
  • stainless steel
  • zinc die cast
  • aluminum die cast
  • passivated zinc/zinc alloys
  • Phosphat
  • typical dry film thickness of 4-20 µm
  • Even layer construction possible.
  • The technical feasibility depends on pretreatment and individual characteristics of each material.

Application technology

  • dip-spin
  • spray
  • dip-drain

Special features

  • organic
  • solvent-based
  • integrated lubricant
  • gaugeability
  • compatible for patching
  • over-paintable

Weathering resistance

  • fulfils the requirements of natural outdoor exposure according to DIN EN ISO 12944-2

Legal conditions

  • meets the EU End-of-Life Vehicle Directive 2000/53/EC
  • meets the RoHS 2 guidelines (also known as EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC)
  • meets the REACh requirements

Contact Person

  • Thorsten Speck

Selection of suitable parts

Washers

Big parts

Panels

Metrical threaded bolts >M16

Metrical threaded bolts M2-M16

Non metrical threaded parts

Clips

Stamped parts

Nuts

Pipes and tubes

Brake parts

Bearings

Springs

Rivets

Advised parts

Suitable parts

Specifications

  • ASTM - F 1136
  • Alstom Transport - DTRF 150217 C
  • Amazone - AWN 004002
  • ArvinMeritor - AM P104
  • Avdel - Threaded Inserts
  • Avdel - Fastriv® Self-piercing Rivets
  • Avdel - Breakstem Systems
  • Bosch - N67F 827
  • Brembo - BDS-11.22
  • Brose - BN590295-109
  • Case New Holland - MAT0320
  • Chongqing Changan - GY-TY-19-2017
  • Continental Teves - ATE N 106 36.31
  • Continental Teves - ATE N 106 61.00
  • Daimler - DBL 8451
  • Daimler - DBL 9440
  • Daimler - DBL 8440
  • Delphi - DX551800
  • FCA (Fiat Chrysler Automotive) - PS-7626
  • FCA (Fiat Chrysler Automotive) - 9.57513
  • Ford Motor Company - WSS-M21P42
  • General Electric - Energy - P14A-AL-0218
  • General Motors - GMW3359
  • IBM - 41-091
  • ISO - ISO/EN 10683
  • IWIS - Anforderungen Zinklamellenbeschichtung
  • Iveco - 18-1101
  • JCB - STD00017
  • Jaguar Land Rover - STJLR.60.5020.X100
  • Jaguar Land Rover - STJLR.50.5045
  • John Deere - LaN 930-11.4
  • John Deere - JDM F13
  • Kamax - KN-5506
  • Kenersys - KSY_SPC_bolt
  • Kiekert - WI-D-27-10-07-00
  • Kion (Linde) - WN 10 615
  • Knorr-Bremse - N12005, P22
  • Knorr-Bremse - N12005, P01
  • MAN - 183-3
  • Mahindra - G00 0056
  • PSA - Opel - GME00255
  • Porsche - VW96215 (PTL 7529)
  • SAF-HOLLAND - Technical Specification
  • Schneider Electric - ABD00050
  • Siemens Infrastructure & Cities - A6Z00033015319
  • Tesla - TM-0010F-M
  • VDA - VDA 235-104
  • Volkswagen - TL 242
  • Volkswagen - TL 233
  • ZKW - Technical Drawing
PDF