User login

Forgot your password?

Product details

Markets Our approach Coating Solutions Coaters Knowledge Base Company


Article number: 08405607

DELTA-PROTEKT® KL 130 is a base coat made of zinc flake technology. The sacrificial characteristics of the zinc lead to the cathodic protection properties of this basecoat.The DELTA-PROTEKT® KL 130 is applied via a non-electrolytic application technique directly onto the substrate (part). The zinc flake technique is described in the standards DIN EN ISO 10683 and DIN EN ISO 13858. The application technology can vary according to the dimension and weight of the part; e.g. small parts are usually coated as dip-spin, bigger parts are usually spray coated. An optional top coat can enhance the corrosion protection properties as well as create some multifunctional characteristics such as a defined window of coefficient of friction, resistances to media, colouring etc.All Dörken MKS products have always been free of harmful heavy metals such as chromium VI. As there is no hydrogen involved during the application process, there is no danger of application-related hydrogen-induced stress corrosion cracking.


  • Basecoat


Corrosion resistance

  • reaches a cathodic corrosion protection as requested per DIN EN ISO 10683

Media resistance

  • fulfils chemical resistance against operating fluids according to DIN EN ISO 2812

Special features

  • inorganic
  • solvent-based
  • gaugeability

Surface / Substrate

  • steel
  • high-strength steel
  • stainless steel
  • passivated zinc/zinc alloys
  • typical dry film thickness of 6-12 µm
  • Even layer construction possible.
  • The technical feasibility depends on pretreatment and individual characteristics of each material.

Application technology

  • dip-spin
  • spray
  • dip-drain

Legal conditions

  • meets the EU End-of-Life Vehicle Directive 2000/53/EC
  • meets the RoHS 2 guidelines (also known as EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC)
  • meets the REACh requirements

Contact Person

  • Florian Feldmann

Selection of suitable parts


Metrical threaded bolts >M16

Metrical threaded bolts M2-M16

Non metrical threaded parts

Pipes and tubes



Hose clamps

Big parts


Stamped parts


Brake parts


Advised parts

Suitable parts


  • ASTM - F3393
  • ASTM - F3125
  • Abus - Teilefreigabe / parts specification
  • Bossard - EV Engineer appendix Rev. 08
  • Daimler - DBL 8440
  • Hendrickson Truck Suspension - HTES-1283
  • ISO - ISO/EN 10683
  • Volkswagen - TL 233
  • Volkswagen - TL 180